Full View
Παρόμοια είδη
Δημοφιλές ηλεκτρονικό ρολόι ανδρών μαύρο αντι-πτωτικό αθλητικό ρολόι τάσης ψηφιακής οθόνης φοιτητικό ρολόι
€9.42€11.62
χρώμα : Διάφανο μπλε
Ποσότητα : 
Κανω ΑΝΑΦΟΡΑ
Συμπεριλάβετε παραβίαση πνευματικών δικαιωμάτωνΔωρεάν τυπική αποστολή. Δείτε λεπτομέρειες
Εκτιμάται μεταξύ Wed, Nov 19 και Tue, Nov 25
Μπορείτε να επιστρέψετε το προϊόν εντός 30 ημερών από την παραλαβή. Δείτε λεπτομέρειες
Ψωνίστε με σιγουριά
Εγγύηση επιστροφής χρημάτων
Πάρτε το προϊόν που παραγγείλατε ή τα χρήματά σας πίσω. Μάθετε περισσότερα
About this item
Προέρχεται από το Sweet song
Seller assumes all responsibility for this listing.Αριθμός αντικειμένου: 25788707
Item specifics
Item description from the seller
Watch size: dial diameter * thickness * total length (CM)
4.6 * 1.68 * 24.5cm (centimeters)
[Product Introduction]
Working principle of electronic watch:
Power supply - Crystal oscillation generates 32768Hz frequency - Frequency division - Rectification - Filtering - Analog to digital conversion - Output
Electronic components
Non directional components (passive components):
Resistance: Unit: Ohm
Capacitor: Unit: Farad
Inductance: Unit: Hen
Directional devices (active devices): electrolytic capacitors, diodes, transistors, buzzers
Movement structure: power (battery) part, PCB, components, rubber cover, hardware
Testing requirements: Testing environment, equipment, and methods.
Accuracy, working current, static current, and functionality. (Service life)
Production process: PCB ->COB ->Soldering ->Testing ->EL sheet ->LCD ->Cover ->Upper board (upper hardware sheet) ->Testing ->Upper battery ->Functional testing ->Applying battery stickers.
Common troubleshooting:
Whiteboard: 1. Check if the battery is charged. If it is not, replace the battery; If there is power, short circuit the AC point of the movement. 2. If the battery is charged and short circuited, repair the PCB.
Broken characters (missing strokes): 1. It may be due to loose screws, just tighten the screws; 2. There is dirt on the barge, just reinstall and remove the dirt; 3. LCD or PCB is damaged, replace the above components.
Press the flashing light or no text: 1. The battery is dead, replace the battery; 2. The battery voltage is normal, flashing according to the light symbol indicates light interference, increasing the interference capacitance;










